Stainless Steel 316/ 316l/ 316ti Sheets, Plates and Coils Supplier

Stainless Steel 1.4401 / 1.4436 Sheets, Stainless Steel 316/ 316l/ 316ti Sheets, ASTM A240 SS 316/ 316l/ 316ti Plates, SUS 316/ 316l/ 316ti Sheets, TP316/ 316l/ 316ti SS Cold Rolled Coils, Stainless Steel 316/ 316l/ 316ti Coils, SS 316/ 316l/ 316ti Industrial Sheets, Plates and Coils Supplier in Mumbai India.


Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils

20%
VISION

50%
MISSION

98%
QUALITY


ASME SA240 316/ 316l/ 316ti Stainless Steel Sheets Stockist, SS 316/ 316l/ 316ti Slit Coils, Stainless Steel 316/ 316l/ 316ti Perforated Sheets, 316/ 316l/ 316ti SS Strips, Stainless Steel TP316/ 316l/ 316ti Circle, Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils Exporter in India.

Stanley alloys are the popular manufacturers and suppliers of Stainless steel 316,316L and 316Ti Sheet Plate Coil.

Stainless Steel 316 Sheets Plate Coil has a composition of chromium and nickel that increases the level of resistance from different substances. It also has an addition of molybdenum in its design, which provides 316 to be more resistant to corrosion. Furthermore, they are mainly in a high-temperature environment as compared to other stainless steel. Therefore, they have more heat prevention than the different 304 types, which possess almost the same characteristics.

Stainless Steel 316L Plates is created to consist of much lower carbon content than the 316 steel as 316L is formed to avoid precipitation of carbon which is also desired. In addition, they are identified as more resistant to oxidation than steel 316, typically in marine or hot environments.

316Ti is a strengthened grade of the 316 steel type and generally preferred as higher temperature conditions. Its name includes Ti. It has Titanium 0.5% even though it still possesses the properties of other 316 grades. Titanium helps to provide resistance to fluctuation to high temperatures. As with different 316 steps, molybdenum serves as increased protection from corrosive environments.

Specification of Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils

Specifications : ASTM A240 / ASME SA240

Dimensions : ASTM, ASME, and API

Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Thickness: 4mm-100mm

Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

APPLICATIONS:

Stainless Steel 316 is the corrosion resistance and generally dominant against chemicals and preferred in Paper or Textile Industries. This steel also finds its use in food processing equipment, nuts, bolts and medical implants.

316L metals are generally useful in weldments, where carbon content is combined with welding to provide maximum resistance against a corrosive environment and used in bulky gauge components. They are also useful in hot marine environments and show resistant oxidation more than type 316. They also offer good resistance against creep and stress to break and show good strength than other stainless steel.

Steel 316Ti shows resistance to acids, such as hydrochloric, sulfuric acids and also acid sulfates. As a result, they are used in heat exchangers, paper mill equipment and different architectural components in marine environments.

Available Types of Stainless Steel 316/ 316l/ 316ti Sheets, Plates and Coils

SS 316/ 316l/ 316ti Sheets

SS 316/ 316l/ 316ti Sheets

Stainless Steel 316/ 316l/ 316ti Sheets

TP 316/ 316l/ 316ti Stainless Steel Cold Rolled Sheets, SS SUS 316/ 316l/ 316ti Sheets, Austainitic Stainless Steel TP316/ 316l/ 316ti Sheets, Stainess Steel 316/ 316l/ 316ti 2B Finish Sheet, 316/ 316l/ 316ti SS No.1 Mirror Finish Sheets, SS 316/ 316l/ 316ti CR Sheets, Stainless Steel 316/ 316l/ 316ti Hot Rolled Sheets, SS UNS S316/ 316l/ 316ti00 Sheets Supplier, 1.4401 / 1.4436 Sheets Exporter.
SS 316/ 316l/ 316ti Plates

SS 316/ 316l/ 316ti Plates

Stainless Steel 316/ 316l/ 316ti Plates

TP 316/ 316l/ 316ti Stainless Steel Cold Rolled Plates, SS SUS 316/ 316l/ 316ti Plates, Austainitic Stainless Steel TP316/ 316l/ 316ti Plates, Stainess Steel 316/ 316l/ 316ti 2B Finish Plates, 316/ 316l/ 316ti SS No.1 Mirror Finish Plate, SS 316/ 316l/ 316ti CR Plates, Stainless Steel 316/ 316l/ 316ti Hot Rolled Plates, SS UNS S316/ 316l/ 316ti00 Plates Supplier, 1.4401 / 1.4436 Plates Exporter.
SS 316/ 316l/ 316ti Coils

SS 316/ 316l/ 316ti Coils

Stainless Steel 316/ 316l/ 316ti Coils

TP 316/ 316l/ 316ti Stainless Steel Cold Rolled Coils, SS SUS 316/ 316l/ 316ti Coils, Austainitic Stainless Steel TP316/ 316l/ 316ti Coils, Stainess Steel 316/ 316l/ 316ti 2B Finish Coil, 316/ 316l/ 316ti SS No.1 Mirror Finish Coils, SS 316/ 316l/ 316ti CR Coils, Stainless Steel 316/ 316l/ 316ti Hot Rolled Coils, SS UNS S316/ 316l/ 316ti00 Coils Supplier, 1.4401 / 1.4436 Coils Exporter.

Equivalent Grades of Stainless Steel 316/ 316l/ 316ti Sheets, Plates and Coils

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 - Z7CND17-11-02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17-11-02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316TI 1.4571 S31635 SUS 316TI 320S31 08Ch17N13M2T Z6CNDT17-123 X6CrNiMoTi17-12-2

Chemical Composition of Stainless Steel 316/ 316l/ 316ti Sheets, Plates and Coils

Grade C Mn Si P S Cr Mo Ni Fe
SS 316 0.08 max 2.0 max 1.00 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 11.00 - 14.00 67.845 min
SS 316L 0.035 max 2.0 max 1.00 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.89 min
SS 316TI 0.08 max 2.0 max 0.75 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.395 min68.395 min

Stainless Steel 316/ 316l/ 316ti Sheets, Plate, Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils Make

ThyssenKrupp Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
ThyssenKrupp Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
Baosteel Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
Baosteel Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
Aperam Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
Aperam Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
Posco Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
Posco Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
Outokumpu Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
Outokumpu Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
ArcelorMittal Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
ArcelorMittal Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
Nippon Steel & Sumitomo Metal Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
Nippon Steel & Sumitomo Metal Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils
JFE Steel Corporation Make SS 316/ 316l/ 316ti Sheets, Plates, Coils
JFE Steel Corporation Make Stainless Steel 316/ 316l/ 316ti Sheets, Plates, Coils

People also search about SS TP316/ 316l/ 316ti Sheets and Plate, Coils

ss 316/ 316l/ 316ti plate exporter, 316/ 316l/ 316ti ss sheets supplier in india, ss 316/ 316l/ 316ti sheet and plate coils sockist in mumbai, ss 316/ 316l/ 316ti sheet plate exporter in india, stainless steel 316/ 316l/ 316ti plates trader in mumbai, astm a240 316/ 316l/ 316ti stainless steel coils, a240 stainless steel 316/ 316l/ 316ti sheet plate, stainless steel 2d/ba/no.4/no.8/8k sheet plate and coil, ss 316/ 316l/ 316ti sheet plate stockist in mumbai, 316/ 316l/ 316ti stainless steel no.4 / #8 / mirror 8k finish sheet plate, 316/ 316l/ 316ti stainless steel sheet price list, 316/ 316l/ 316ti stainless steel plate specification, ss tp316/ 316l/ 316ti sheet plate manufacturer, 316/ 316l/ 316ti stainless steel sheet chemical composition, 316/ 316l/ 316ti ss plates supplier, ss 316/ 316l/ 316ti sheet price list, 26 gauge stainless steel 316/ 316l/ 316ti sheet and plate, 316/ 316l/ 316ti ss sheet sizes, 16 gauge stainless steel 316/ 316l/ 316ti plate, 316/ 316l/ 316ti stainless steel coils mechanical properties, stainless steel 316/ 316l/ 316ti plate thickness, tp316/ 316l/ 316ti stainless steel sheet gauge, steel 316/ 316l/ 316ti sheets & plate gauge thickness chart, ss 316/ 316l/ 316ti sheet and plates coils cut to size, astm a240 stainless steel tp316/ 316l/ 316ti sheet plate coil dealer in india.

Application Industries

Application Industries
  • Constructions
  • Industry & Factory
  • Power Generation Industries
  • Civil Engineering
  • Oil and Gas Industries
  • Petrochemical Industries
  • Engineering Industries

Our Global Presence

  • India India
  • Japan Japan
  • Russia Russia
  • United States United States
  • Saudi Arabia Saudi Arabia
  • Kuwait Kuwait
  • Singapore Singapore
  • Malaysia Malaysia
  • Uae UAE
  • Germany Germany
  • Italy Italy
  • China China
  • UK UK
  • Canada Canada
  • Iran Iran
  • Thailand Thailand
  • South Korea South Korea
  • Turkey Turkey
  • Morocco Morocco
  • Costa Rica Costa Rica
  • Kazakhstan Kazakhstan
  • Philippines Philippines
  • Egypt Egypt
  • Vietnam Vietnam
  • Oman Oman
  • Australia Australia
  • Qatar Qatar
  • Portugal Portugal
  • Mexico Mexico
  • Brazil Brazil
  • France France
  • South Africa South Africa
  • Jordan Jordan
  • Spain Spain
  • Hong Kong Hong Kong
  • Netherlands Netherlands
  • Indonesia Indonesia
  • Taiwan Taiwan
  • Nigeria Nigeria
  • Bangladesh Bangladesh
  • Iraq Iraq
  • Ukraine Ukraine
  • Poland Poland
  • Romania Romania
  • Cyprus Cyprus
  • Angola Angola
  • Colombia Colombia
  • Norway Norway
  • Chile Chile
  • Tobago Tobago
  • Greece Greece
  • Czechia Czechia
  • Belgium Belgium
  • Sri Lanka Sri Lanka
  • Myanmar Myanmar
  • Venezuela Venezuela